Extended Mag Catch for Gen 6 Glock 19 3D Print File

Extended Magazine Catch for Glock 19 Gen 6 *3D PRINT FILE*

This extended magazine catch is designed specifically for the Glock 19 Gen 6. Its extended profile provides additional reach and a larger contact surface, making the magazine release easier to locate and operate without requiring as much movement of the shooting hand.

The magazine catch is fully reversible and can be installed on either the left or right side of the frame. This allows the release to be configured for right-handed or left-handed shooters.

The textured face provides positive thumb or finger contact while maintaining a clean, factory-style appearance.

Features

• Designed specifically for the Glock 19 Gen 6
• Reversible for right-handed or left-handed use
• Can be installed on either side of the frame
• Extended profile for easier access
• Increased contact area
• Textured face for a more positive feel
• Uses the factory magazine catch system
• Ideal for range use, competition, testing, and custom builds

Compatibility

This model is designed for the:

• Glock 19 Gen 6

Compatibility with other Glock models, generations, aftermarket frames, or frame sizes has not been confirmed.

Minor sanding, filing, or other fitment may be required depending on printer calibration, material shrinkage, and individual frame tolerances.

Printing Recommendations

Print using a durable, impact-resistant material with properly calibrated dimensional settings. Avoid brittle materials that may crack, wear rapidly, or deform during installation and use.

For the strongest finished part, use:

• A high wall count
• High infill
• A fine layer height
• Properly calibrated flow and dimensional settings
• A durable material suitable for functional components

Carefully remove all supports and clean the surfaces that contact the frame, magazine, and magazine catch spring.

Installation and Function Testing

Always verify that the firearm is completely unloaded before beginning installation.

Install the magazine catch on the appropriate side of the frame based on the shooter’s handedness and preferred method of operation.

After installation, confirm that:

• The magazine catch moves freely
• The catch returns completely after being pressed
• The magazine locks securely into the frame
• The magazine cannot be pulled free without pressing the catch
• The magazine releases properly when the catch is pressed
• All magazines intended for use insert, lock, and release correctly

Test the component thoroughly with an unloaded firearm before conducting any live-fire testing.

Important Safety Notice

This is a user-created, 3D-printed component and is not manufactured, endorsed, or approved by Glock.

Printed components may wear, deform, loosen, or fail depending on the printing material, print orientation, printer calibration, installation, firearm tolerances, and conditions of use. Inspect the magazine catch regularly and discontinue use immediately if cracking, deformation, excessive wear, or unreliable magazine retention is observed.

The user assumes all responsibility for printing, installation, testing, and use.